AccuTemp S62401D060 SGL6 Pans Electric Steam’N’Hold Boilerless Convection Steamer – 240 Volts

Introducing, the S6 SGL Connectionless Steam’N’Hold™ Steamer that is designed-certified as a holding cabinet with temperature control!

Finding a good location for the AccuTemp S62401D060 SGL Connectionless Steam’N’Hold™ Steamer will never be a problem as it is designed to fit all kitchen sizes. It is constructed with a dimension of 60 inches (H) x 27 inches (W) x 28 inches (D) and weighs 281 pounds. The exterior is completed with a steamer cavity that is made of reinforced 14 ga. 304 stainless steel, front-mounted drain valve, stainless steel support stand with casters, a quick-release door that is hinged on the right, and a cooking chamber. The quick-release function of this heavy-duty door works by allowing the door to open anytime during the cooking cycle. While the cooking chamber is furnished to accommodate six pans with a dimension of 12 inches x 20 inches x 2.5 inches deep (each). It also has a heating element that smartly positioned inside the equipment to protect it from water.
The AccuTemp S62401D060 SGL Connectionless Steam’N’Hold™ Steamer is powered by electricity. It will smoothly run on 240 volts/60 Hz/1 phase with 25 Amp (30 Amp for the breaker). It also requires 6k Watts. To connect it, AccuTemp Products, Inc. includes a set of NEMA L6-30P plug and 5-foot long power cord. For the water supply, it doesn’t need one. That’s right, no water or drain line required for this commercial Electric Vacuum Capable Steamer. It contains a 3-gallon water reservoir. To protect it from draining, it has been equipped with low water protection that is completed with light and buzzer.

The seamless operation of this AccuTemp S62401D060 SGL Connectionless Steam’N’Hold™ Steamer lies on its super duty heater configuration and other smart technologies it is equipped with. These technologies are the patented vacuum technology that is designed for efficiency and fast cooking. It is NSF certified too as a holding cabinet and contains an exclusive low temperature steam cooking mode (patented). It is indeed powerful, but you can manage it easily using its user-friendly control panel. This control panel covers the functions of the 3 operating modes (fast cook, low temperature steam cooking, and variable temperature hold). The fast cooking can cook at a temperature of 212°F and 150°F – 200°F for the low temperature steam cooking.

More on the controls, the control panel of the AccuTemp S62401D060 SGL Connectionless Steam’N’Hold™ Steamer also holds the power switch, fast cook and thermostat mode selector switch, indicator lights for the heat, cook, and hold functions, vacuum and temperature gauges, and a 90-minute timer. The continuous cook and hold mode settings are included in this timer.